International transport · FlixBus
Prague – Pula · 17:20
International departure Prague – Pula at 17:20, arriving 08:25. Duration 15 h 5 min, 906 km, Wed–Sat. Stop-by-stop timetable, route on the map and other departures on the route.
- 17:20Departure
- 08:25Arrival
- 15 h 5 minTravel time
- 15Stops
Days of operation
Does it run on
Does not run
Other departures on this route
Operator
FLFlix SEMünchenLine: Prague - Pula
Source
Departures and stops come from the timetable of Zagreb Bus Station (Autobusni kolodvor Zagreb, voznired.akz.hr) and from FlixBus; timetables are published by the operators. Check the departure at the station before travelling — operators can change timetables.
Route
The line follows the roads the bus takes between the stops in the timetable.
Timetable by stop
Departure time from each stop for this trip.
There is waiting at the border crossing — the time in the timetable is the operator’s estimate, without queues.
- 17:20Prague (Florenc)0,5 km
- 17:45Prague (Roztyly)9,9 km
- 19:00Tábor94,1 km
- 19:55České Budějovice157,3 km
- 20:30Český Krumlov185,7 km
- 21:50Linz Industriezeile270,2 km
- 23:45Salzburg South (Hellbrunner Landesstraße)420,2 km
- 03:22Ljubljana640,1 km
- 04:50Trieste (Autostazione)733 km
- 05:23Koper Banka756,7 km
- 05:39Portorož770,7 km
- 06:15Umag790,5 km
- 07:00Poreč831,4 km
- 07:45Rovinj866,7 km
- 08:25Pula905,9 km
Departure Prague – Pula at 17:20
The bus leaves Prague at 17:20 and reaches Pula at 08:25. The trip takes 15 h 5 min over 906 km, calling at 15 stops. Days of operation: Wed–Sat.
The operator is FlixBus. Via Prague (Roztyly), Tábor, České Budějovice, Český Krumlov, Linz Industriezeile — the departure time from each stop is in the timetable below. The times do not include waiting at the border.
Frequently asked questions
What time does the bus Prague – Pula leave?
It leaves at 17:20 and arrives at 08:25 (15 h 5 min).
Which days does this departure run?
Days of operation: Wed–Sat. On this page you can pick a day and see whether it runs.
Where does the bus stop on the way?
It calls at 15 stops, among them: Prague (Roztyly), Tábor, České Budějovice, Český Krumlov, Linz Industriezeile. The full timetable is in the table on this page.
How far is Prague – Pula?
906 km according to the timetable, taking 15 h 5 min (without waiting at the border).
The data is for information only: it is transcribed from the public timetables of operators running international lines. Always check the departure, arrival, platform and border crossing conditions with the operator or at the bus station — timetables can change without notice. For a trip abroad also check whether you need a visa and travel insurance, and bring a valid passport or ID card. busevi.rs does not sell tickets and is not responsible for delays, changes or cancelled departures.